Smart-UPS APC SRT2200va rm 120v 50/60hz, - 3 Hz

APC Smart-UPS SRT 2200VA RM 120V

- High density, double-conversion on-line power protection with scalable runtime
- Includes : CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, USB cable, Warranty card
- Battery failure notification
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- ECO Mode
- Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
- LCD graphics display
- Text and mimic diagrams that display modes of operation, system parameters and alarms.
- Rack/Tower convertible
Availability

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Scalable runtime
Allows additional run time to be quickly added as needed.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Manageability

SmartSlot
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual indicators.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Serial connectivity
Provides management of the UPS via a serial port.
Network manageable
Provides remote power management of the UPS over the network.

Adaptability

Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Marketing Features

Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation,and zero transfer time to battery during power events.
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Save time with easy and convenient remote accessibility.
Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Serviceability

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Audible alarms
Provides notification of changing utility power and UPS power conditions
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Protection

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Cold-start capable
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

APC SRT2200RMXLA. Topología UPS: Doble conversión (en línea), Capacidad de potencia de salida (VA): 2,2 kVA, Potencia de salida: 1800 W. Tipo de salida AC: NEMA 5–20R,NEMA L5-20R, Conector: NEMA 5-20P, Tipo de serie de interfaz: RJ-45. Tecnología de batería: Sealed Lead Acid (VRLA), Capacidad de la batería: 306 Ah, Tiempo típico de respaldo a carga completa: 3,3 min. Factor de forma: Montaje en rack/Torre o Montaje en bastidor/Torre, Color del producto: Negro, Capacidad del rack: 2U. Ancho: 432 mm, Profundidad: 584 mm, Altura: 85 mm

Topología UPS	Doble conversión (en línea)
Capacidad de potencia de salida (VA)	2,2 kVA
Potencia de salida	1800 W
Forma de onda	Seno
Voltaje de entrada de operación (min)	108 V
Voltaje de entrada de operación (max)	150 V
Frecuencia de entrada	40/70 Hz
Voltaje de operación de salida (min)	120 V
Voltaje de operación de salida (max)	120 V
Frecuencia de salida	50/60 Hz
Índice de aumento de energía	340 J
Factor de cima	3:1
Apagado de emergencia	Si
Salida de voltaje Distorsión Armónica Total	2%
Nivel de ruido	55 dB
Protección de sobrecarga	Si
Alarma(s) audibles	Si
Auto-rearranque	Si
Tipo de salida AC	NEMA 5–20R,NEMA L5-20R
Conector	NEMA 5-20P
Puerto USB	Si
Interfaz en serie	Si
Tipo de serie de interfaz	RJ-45
Puerto serial	1
Ethernet LAN (RJ-45) cantidad de puertos	1
SmartSlot	Si
Tecnología de batería	Sealed Lead Acid (VRLA)
Capacidad de la batería	306 Ah
Tiempo típico de respaldo a carga completa	3,3 min
Tiempo típico de respaldo a media carga	10,3 min
Vida útil de la batería (máx.)	5 años
Batería hot-swap	Si
Prueba de baterías automática	Si
Arranque en frío	Si
Cartucho para batería de repuesto	APCRBC141
Factor de forma	Montaje en rack/Torre o Montaje en bastidor/Torre
Color del producto	Negro
Capacidad del rack	2U
Longitud de cable	1.83 m
Indicadores LED	Alarma, Estado
Pantalla	LCD
Código IP (International Protection)	IP20
Certificación	CSA C22.2 No.107.3-05, FCC Part 15 Class A, OSHPD, UL 1778
Intervalo de temperatura operativa	0 - 40 °C
Intervalo de temperatura de almacenaje	-20 - 50 °C
Intervalo de humedad relativa para funcionamiento	0 - 95%
Intervalo de humedad relativa durante almacenaje	0 - 95%
Altitud de funcionamiento	0 - 3000 m
Certificados de sostenibilidad	RoHS, ENERGY STAR
Ancho	432 mm
Profundidad	584 mm
Altura	85 mm
Peso	24,9 kg
Tornillos incluídos	Si
soporte	Si
Cables incluidos	Cable USB
Guía de instalación rápida	Si
Fuente CD	Si
Tarjeta de garantía	Si
CD de software	Si
Ancho del paquete	599 mm
Profundidad del paquete	810 mm
Altura del paquete	246 mm
Peso del paquete	34 kg
Cantidad por palé	12 piezas